Uparivanje racunara i bsi

alexa2406 · 26-10-2013 01:01:25

Ljudi kako upariti racunar I bsi na pezou 206 1.4 hdi

acom · 26-10-2013 08:01:42

Tog pezoa neces sam moci upariti bsi i ecu ako nisi auto-elektronicar, bolje vozi odmah nekome ko ima alate i znanje da to uradi.

Maybach_ · 26-10-2013 20:55:06

Ako imas pin kod i pp2000 mozes to da sredis i ako slucajno nisi menjao BSI ili ECU e onda du..duu....dugacka je to prica

alexa2406 · 26-10-2013 21:25:56

Sa pp,nisam radio ali sam ppzajmio od kolege koji mi je dao I pp I soft.da instaliram na svoj posto je njegov crkao kpmp.sto sam I uradio medjutim nece da se zakaci na bsi I na ecu,a sa kts,komunkaciju sa central.elektr.ima I kaze da je ecu zakljucan,kada stavim drugi ecu,bez bsi ima.kom.sa ecu ali I dalje.nema sa bsi

alexa2406 · 26-10-2013 21:28:03

A da I abs prepoznaje vise nista neprepoznaje pp

alexa2406 · 26-10-2013 21:31:28

Na tim francuzima nisam toliko radio ta uparivanja I menjanje racunara da bi bio upoznat,ali pretpostavljam da je.slicno kao I kod GM it'd,iscitati login kod it'd da bi se pristupilo konfiguraciji

Kele · 26-10-2013 23:00:27

Veruj mi nije bas lako,moras se dobro oznojiti da ih uparis a pogotovo ako menjas ili racunar ili bsi.

acom · 27-10-2013 00:07:44

Jos ako je siemens SID80.. elektronika zaboravi ...

delphi · 27-10-2013 01:18:47

acom napisao:

Jos ako je siemens SID80.. elektronika zaboravi ...

sid 801 mi je uzeo 5 g života al fakat ako nemaš alat i DOBRO iskustvo ====== roll mad ==== du duu dugačka priča

Maybach_ napisao:

Ako imas pin kod i pp2000 mozes to da sredis i ako slucajno nisi menjao BSI ili ECU e onda du..duu....dugacka je to prica

Zadnja izmjena od delphi (27-10-2013 01:20:05)

alexa2406 · 27-10-2013 02:30:39

Videcu I poned.da ga razvalim I da vidim sta se. Moze uraditi

koyot · 27-10-2013 13:17:23

najbolje da nazoves servis ovlasteni peugeot pa oni ti objasne sve u detalje

delphi · 27-10-2013 21:31:06

ČITAV DAN se smijem u radioni za "uputstvo" za uparivanje,popravku bsi-a čitav dan mi zvrči po glavi (du..duuu...dugačka je to priča) Maybach svaka ti dala lol lol lol lol lol

Maybach_ napisao:

Ako imas pin kod i pp2000 mozes to da sredis i ako slucajno nisi menjao BSI ili ECU e onda du..duu....dugacka je to prica

Maybach_ · 27-10-2013 22:07:43

Hahaha delphi kralj si.... lol lol lol lol

Zadnja izmjena od Maybach_ (27-10-2013 22:09:09)

alexa2406 · 29-10-2013 23:52:53

Zamenjen racunar,naravnp polovan stavljen,ali sada se javlja problem da se posle izvrsnog vremena ugasi auto ,ponovo palis radi I opet posle nekog vremena gasi,na pp2000 prijavljuje prekidac kvacila I senzor bregaste nije sinhronizovan,u mernim blokovima pokazuje da je sinhronizovan.u centralnu elektroniku pp2000 neprepoznaje.

koyot · 29-10-2013 23:55:11

daleko ces dogurat popravljajuci ovako preko foruma -tj cekas da ti drugi nacrtaju kako i sta trebas radit i popravit

bas si pravi majstorcina-

alexa2406 · 30-10-2013 00:08:42

Pa reci majstorcino bar nesto,ja neznam nista ajde ti si pametan vise si ovde na forumu nego u radionici pogledaj koliko komentara imas,2500 koment.svaki dan po jedan pametan da si pisao vise bi nas naucio,ako znas ti reci nego zaludjuje

alexa2406 · 30-10-2013 00:09:55

Sta ces da mi kazes da auto nije uzupcen,da je senzor radilice senzor bregaste,

koyot · 30-10-2013 00:24:09

sto bi te ja trebao ucit -imas kurs ili skolu za mehanicare pa studiraj

alexa2406 · 30-10-2013 00:32:54

Hahahhaa,dobar si da neces da mi drzis ti kurs,ajde batali me ako nemas sta pametno reci idi budzi IMT,trebace ti.

koyot · 30-10-2013 00:47:29

oces reci da si ti vec izucio znanje na imt pa sad presao na autoindustriju:D

alexa2406 · 30-10-2013 01:03:21

To sam imao za diplomski,jel imas nesto pametno da napises ili pises gluposti,posto vexina tvoji komentari su gluposti,ajde vreme je za nesto pametno da kazes,budi drug pa mi reci sta je problem molim te.sto si takav

DS9 · 30-10-2013 10:41:45

Sa jednog od pgt foruma, gde je opisano zašto ecu i bsi moraju da budu upareni:

First we like to let you know that it is not possible to fit a second hand BSI to a peugeot. Below are a few BSI facts.

•The engine ECU and the BSI have to be matched.
•Each ECU in a correctly functioning system has a 4 digit code programmed into it.
•Once this code is entered into the ECU it will not be possible to be read, deleted or modified.
•The second hand BSI can't be matched to the existing engine ECU even if you know both codes from both ECU's.
•In order to fit a new BSI you need to know the correct security code of the existing engine ECU so you can enter this code in the new BSI.
•If you get this wrong the new BSI will become unusable.
•If you don't know the correct code for the existing engine ECU then you need to replace the engine ECU and the BSI.
•They then will need to be configured and matched. If the code to the vehicle is not known you can make up a code in this case but make sure you enter the same code in both ECU. It could be an expensive exercise to get this one wrong.
•Peugeot Dealers can obtain the security codes for a particular vehicle if you are the lawful owner.
•The odometer reading (distance travelled) is memorised in the BSI and the instrument panel. If you connect a second hand BSI with a reading
higher then the one on the instrument, the distance on the instrument will increase to the higher BSI reading as soon as it is connected to the car.
•So beware, a customer would not be happy if his distance suddenly jumped up several thousand kilometres.
•There is one way you can fit a second hand BSI. Use the engine ECU from the same donor car where the BSI came from.
•It would then still be helpful if you can obtain the donor cars 4 digit security code for future programming, and also remember the issue with the distance. The distance reading won't be a problem if the donor car has lower distance then the recipient, the distance in the BSI will then simply go up to the correct distance.

Repair is an alternative for replacement of the BSI.
Here is a link to a company in the UK that claims to repair Peugeot BSI units.
BBA-Reman.com

***

Slična problematika

Sve u svemu prilična muka, ali se i radi.

***

Na ovom francuskom forumu u odgovoru je dat atach
koji pominje Pgt 206 1.4 hdi

Nisam siguran da može u konkretnom slučaju da pomogne, ali onaj kome bude trebalo će već znati.

Srećno

Zadnja izmjena od DS9 (30-10-2013 10:43:51)

acom · 30-10-2013 11:02:26

Izvanredni "facts" vidi se odmah da covjek zna materiju.

DS9 napisao:

Sa jednog od pgt foruma, gde je opisano zašto ecu i bsi moraju da budu upareni:

First we like to let you know that it is not possible to fit a second hand BSI to a peugeot. Below are a few BSI facts.

•The engine ECU and the BSI have to be matched.
•Each ECU in a correctly functioning system has a 4 digit code programmed into it.
•Once this code is entered into the ECU it will not be possible to be read, deleted or modified.
•The second hand BSI can't be matched to the existing engine ECU even if you know both codes from both ECU's.
•In order to fit a new BSI you need to know the correct security code of the existing engine ECU so you can enter this code in the new BSI.
•If you get this wrong the new BSI will become unusable.
•If you don't know the correct code for the existing engine ECU then you need to replace the engine ECU and the BSI.
•They then will need to be configured and matched. If the code to the vehicle is not known you can make up a code in this case but make sure you enter the same code in both ECU. It could be an expensive exercise to get this one wrong.
•Peugeot Dealers can obtain the security codes for a particular vehicle if you are the lawful owner.
•The odometer reading (distance travelled) is memorised in the BSI and the instrument panel. If you connect a second hand BSI with a reading
higher then the one on the instrument, the distance on the instrument will increase to the higher BSI reading as soon as it is connected to the car.
•So beware, a customer would not be happy if his distance suddenly jumped up several thousand kilometres.
•There is one way you can fit a second hand BSI. Use the engine ECU from the same donor car where the BSI came from.
•It would then still be helpful if you can obtain the donor cars 4 digit security code for future programming, and also remember the issue with the distance. The distance reading won't be a problem if the donor car has lower distance then the recipient, the distance in the BSI will then simply go up to the correct distance.
Repair is an alternative for replacement of the BSI.
Here is a link to a company in the UK that claims to repair Peugeot BSI units.
BBA-Reman.com
***
Slična problematika

Sve u svemu prilična muka, ali se i radi.
***
Na ovom francuskom forumu u odgovoru je dat atach
koji pominje Pgt 206 1.4 hdi
Nisam siguran da može u konkretnom slučaju da pomogne, ali onaj kome bude trebalo će već znati.
Srećno

alexa2406 · 30-10-2013 11:20:02

ok.h...a.

LuxBih · 30-10-2013 14:41:25

Može se to i drugačije izvest ali ti tu treba kamaru ozbiljnijeg alata, spram kog pps dodje ko igracka.

elprog forum

#1 26-10-2013 01:01:25

Uparivanje racunara i bsi

#2 26-10-2013 08:01:42

Re: Uparivanje racunara i bsi

#3 26-10-2013 20:55:06

Re: Uparivanje racunara i bsi

#4 26-10-2013 21:25:56

Re: Uparivanje racunara i bsi

#5 26-10-2013 21:28:03

Re: Uparivanje racunara i bsi

#6 26-10-2013 21:31:28

Re: Uparivanje racunara i bsi

#7 26-10-2013 23:00:27

Re: Uparivanje racunara i bsi

#8 27-10-2013 00:07:44

Re: Uparivanje racunara i bsi

#9 27-10-2013 01:18:47

Re: Uparivanje racunara i bsi

#10 27-10-2013 02:30:39

Re: Uparivanje racunara i bsi

#11 27-10-2013 13:17:23

Re: Uparivanje racunara i bsi

#12 27-10-2013 21:31:06

Re: Uparivanje racunara i bsi

#13 27-10-2013 22:07:43

Re: Uparivanje racunara i bsi

#14 29-10-2013 23:52:53

Re: Uparivanje racunara i bsi

#15 29-10-2013 23:55:11

Re: Uparivanje racunara i bsi

#16 30-10-2013 00:08:42

Re: Uparivanje racunara i bsi

#17 30-10-2013 00:09:55

Re: Uparivanje racunara i bsi

#18 30-10-2013 00:24:09

Re: Uparivanje racunara i bsi

#19 30-10-2013 00:32:54

Re: Uparivanje racunara i bsi

#20 30-10-2013 00:47:29

Re: Uparivanje racunara i bsi

#21 30-10-2013 01:03:21

Re: Uparivanje racunara i bsi

#22 30-10-2013 10:41:45

Re: Uparivanje racunara i bsi

#23 30-10-2013 11:02:26

Re: Uparivanje racunara i bsi

#24 30-10-2013 11:20:02

Re: Uparivanje racunara i bsi

#25 30-10-2013 14:41:25

Re: Uparivanje racunara i bsi

Board footer