FiatECUScan prelazi u MULTIECUSCAN

DejanNS · 09-08-2012 02:21:05

Ne znam baš sve pikanterije ali postoji neki problem oko naziva FiatECUScan pa će od danas isti ići pod nazivom MULTIECUSCAN. Takođe će narednih dana sav saobraćaj sa oficijalnog sajta biti preusmeren na / a nova verzija softvera biće brendirana novim nazivom i logom. Idemo iz početka:

08/08/2012 - MULTIECUSCAN 1.0
- Software is now called MULTIECUSCAN
- Added support for SUZUKI SX4
- Improved SCAN function
- Added "priority" for parameters when recording data
- Added "Torque sensor calibration" for Delphi Electric Steering (500, Grande Punto, Punto Evo, Mito)
- Support for Marelli/Hella climate control (Lybra)
- Support for Magneti Marelli IAW 4AF/4EF GAS Injection (Multipla Bipower, Doblo Bipower) (Full support)
- Support for Magneti Marelli IAW 5AF GAS Injection (Punto Bipower, Panda Bipower) (Full support)
- Support for Magneti Marelli IAW 5SF CF4/EOBD Injection (Stilo, Palio, Linea, Doblo, Ypsilon, Musa) (Full support)
- Support for Magneti Marelli IAW 4SF Injection (Palio, Linea) (Full support)
- Support for Landi Renzo LC02 LPG Injection (Bravo, Punto, Grande Punto, Punto Evo, Panda, Mito, Ypsilon)
- Support for Metatron 6A0/EOBD CNG Injection (Punto Bipower, Panda Bipower, Doblo Bipower)
- Support for Metatron 6A0 CNG Injection (Punto Bipower, Doblo Bipower)
- Support for Metatron 5D0/EOBD CNG Injection (Multipla Bipower)
- Support for Driver's Seat LEAR (Stilo, Croma, Bravo, 159, Brera, Delta) (Info and DTC only)
- Support for Passenger's Seat LEAR (Stilo, Croma, Bravo, 159, Brera, Delta) (Info and DTC only)

Što se tiče vlasnika registrovanog sw-a, sve ostaje po starom osim što se naziv menja.

k-tuning · 09-08-2012 09:14:34

predobro

mmirko · 10-08-2012 06:44:29

dobra stvar,dejane dali si radio prepravku elm uredjaja?Na stranici pise da moze raditi s elm,samo treba eliminirati .....

DejanNS · 10-08-2012 11:19:41

Ne znam na kakvu prepravku misliš? Prepravljaju se nekompatibilni ELM-ovi da bi prpradila CAn komunikacija, a prepravljaju se i zarad povezivanja na 1,9,12... pin. Mada je dosta elegantnije rešenje u vidu tri adaptera.

alfa156sarajevo · 10-08-2012 12:26:45

@ DejanNS
da li imas informaciju kada ce forum proraditi?
pisalo je nesto oko 10.8. da treba proraditi...

DejanNS · 10-08-2012 13:22:45

Kad reši problem sa hostingom

DejanNS · 11-08-2012 00:20:02

Novi forum radi

DejanNS · 11-08-2012 00:21:57

Hi,

The server where we hosted this forum crashed on Sunday, 05/08 and the hosting company had some troubles to fix it...
So, we moved it to another server and now it is operational again.
Unfortunately, we have some missing threads from the last month.

heyco · 27-08-2012 23:39:54

Pošto ima tu više majstora za vozila FLAR,imam nekoliko pitanja.Prošle godine uplatio sam licencu za ecuscan,koji se sad zove multiscan.Prošle sedmice uspješno sam nadgradio prošli softver u najnovijeg.Jedini auto marke fiat bio je punto 1.2 god 2003.Tu je sve radilo solidno preko kabla kkl.Na strani multiscan-a primjetio sam,da neke stvari ne rade,ako imamo loš kabl od ELM 327.Pošto još nisam imao prilike raditi neko vozilo sa CAN sabirnicom,zanima me,što ne radi,ako je interfejs " škart".Lp

alfa156sarajevo · 28-08-2012 22:56:00

@heyco
pa znaces po tome sto svaki klon ELM interfejsa se sasvim normalno povezuje na motor, a na Body modul (sistem) nece nikako da se poveze...

u vecini slucajeva treba rastaviti taj ELM interfejs i sa ploce skinuti ili R04 otpornik ili R14 otpornik, a to ti sve zavisi od ploce koja je unutra...
izgled ploce imas u ovoj temi:
tema ima vise od 30 stranica pa budi strpljiv dok ne prponadjes svoju plocu...
ili uslikaj plocu tog ELM-a koji te zanima i postavi pitanje u navedenoj temi i dobices brzo odgovor... wink

heyco · 28-08-2012 23:30:50

Brzo sam dobio odgovor na svoje pitanje.Imam sreču,što se mlađi brat bavi pomalo i sa elektronikom,pa ču ga uz priliku angažirati za popravku interfejsa pomoču ovih slika.Pozdrav

DejanNS · 12-10-2012 01:32:15

Izašla je nova verzija Multiscan-a
Improved SCAN function
- Added support for OBD-Direct/Protect interface
- Added possibility to change Sevice Distance (on almost all vehicles) and Service Period (on some vehicles) in Service Interval Reset modules
- Added Logistic Mode control for Panda, Croma and 159 Body Computers
- Added parameters for injection quantity, time, advance of all 5 injections in some multijet engines
- Added the generation and export of CSV file with engine parameters during DPF regeneration
- Support for Marelli climate control (Stilo, Bravo) (Full support)
- Support for Marelli 8DF CF5/EOBD Diesel Injection (1.3) (Panda, Idea, Ypsilon, Musa)
- Support for Bosch Motronic ML4.1 Injection (GTV, Spider, 164)
- Support for Bosch Monomotronic MA1.7 Injection (Fiorino, Tempra, Tipo, Uno, Delta, Y10)
- Support for Magneti Marelli IAW 4GF BI-Power Injection (Multipla)
- Support for Magneti Marelli IAW 4GF BLU-Power Injection (Multipla, Marea)
- Support for Driver's Door G.E. PROCOND (Brera)
- Support for Passenger's Door G.E. PROCOND (Brera)
- Support for Driver's Seat LEAR (Giulietta) (Info and DTC only)
- Support for Passenger's Seat LEAR (Giulietta) (Info and DTC only)
- Support for DTC Details of Bosch Motronic MED7.11 EOBD Injection
- Support for DTC Details of Bosch Motronic MeD7.6.1 CF4/EOBD Injection
- Support for DTC Details of Bosch Motronic MeD7.6.2 CF4/EOBD Injection
- Support for DTC Details of Bosch Motronic MeD17.3.1 CF5/EOBD Injection
- Support for DTC Details of Marelli 6JF EOBD Diesel Injection
- Support for DTC Details of Bosch EDC16C39 CF5/EOBD Diesel Injection

heyco · 13-10-2012 21:32:57

Nova verzija uspješno je instalirana i isprobana.Oko prerade mog ELM 327 ustanovili smo,da je izrađen van svih normi,da bi uspješno radio sa multiecuscan-om.Ustanovili smo,da če biti najbolje potražiti novi modificirani za rad na FLAR.Naručio iz GB i stiže za koji dan.Nadam se,da ču ga isprobati več idučeg tedna.Pozdrav

ELPROG FORUM

#1 09-08-2012 02:21:05

FiatECUScan prelazi u MULTIECUSCAN

#2 09-08-2012 09:14:34

Re: FiatECUScan prelazi u MULTIECUSCAN

#3 10-08-2012 06:44:29

Re: FiatECUScan prelazi u MULTIECUSCAN

#4 10-08-2012 11:19:41

Re: FiatECUScan prelazi u MULTIECUSCAN

#5 10-08-2012 12:26:45

Re: FiatECUScan prelazi u MULTIECUSCAN

#6 10-08-2012 13:22:45

Re: FiatECUScan prelazi u MULTIECUSCAN

#7 11-08-2012 00:20:02

Re: FiatECUScan prelazi u MULTIECUSCAN

#8 11-08-2012 00:21:57

Re: FiatECUScan prelazi u MULTIECUSCAN

#9 27-08-2012 23:39:54

Re: FiatECUScan prelazi u MULTIECUSCAN

#10 28-08-2012 22:56:00

Re: FiatECUScan prelazi u MULTIECUSCAN

#11 28-08-2012 23:30:50

Re: FiatECUScan prelazi u MULTIECUSCAN

#12 12-10-2012 01:32:15

Re: FiatECUScan prelazi u MULTIECUSCAN

#13 13-10-2012 21:32:57

Re: FiatECUScan prelazi u MULTIECUSCAN

Board footer